There will be no fogging up at all. Lenses will in the worst of conditions just get wet. When going from a cool or cold environment into a warm humid one there will be no reaction at all. Glasses, ski-goggles, diving-goggles, facemasks, hockey-shields, motorcycle face shields will all be more protected. Lenses will stay clean for days. The total antistatic action will prevent dust from clinging on to the lens surfaces. Therefore much less possibilities of scratching and damaging the lens surfaces. A static charge will be totally dissipated and gone within seconds.
This product has received certification by the Swiss Government to be free of health hazards and toxicity for use by the general public.
Electric non conductivity is one of the various advantages that plastics
possess generally. However, there are cases where this advantage turns to be
a defect that static electric charge accumulates on the surface of plastics.
Static electricity gives troubles such as electric shock, dust attraction
and sticking of films. Antistatic agents have in their molecules both hydrophobic and hydrophilic radicals. Practically, the hydrophobic radicals turn to the surface of plastics, while the hydrophilic radicals turn to the air attracting the moisture in the atmosphere. The static charge accumulation in plastics os dissipated, through the conductivity of water absorbed by antistatic agents.
Spray some of the liquid on the lens surfaces and clean lenses with a Kleenex. Once the lenses are clean spray on liquid for a second time and spread it around with fingers. Let it dry and then using a fresh dry towel wipe any smears. One treatment per day will be sufficient. The treatment can be effective for several days.
Some face-shield made from polycarbonate that have no protective coating on the surface might get damaged by this product. If not sure, apply just a little bit of "zero-fog" to a corner of the face-shield or lens. Wait a minute or two before wiping it off to see if any whitening of the surface occurs.
Apply "ZERO-FOG" and place glasses or lens into a freezer for 45 seconds to one minute. Remove from freezer. If lenses do not fog up, treatment has been properly applied Also passing the lens through steam at 30 cm above a steaming water kettle is an adequate test.
Available at your local Optician or Optometrist, from Optical Distributors or direct from OMS Optochemicals at e-mail: oms_optical@yahoo.com credit cards accepted. Distributor for use on swimm goggles at ► http://aquagoggles.com
Click To Return to ► OMS Optochemical Main Page Material Safety Data Sheet on request
e-mail: oms_optical@yahoo.com |
||||||||||||||||||||||||||